The HALO Wallbox™ from Charge- Amps enables you to charge your car is during the hours when it is normally parked.
HALO Wallbox™ is a compact and reliable charging station integrated with smart software and made of durable recycled aluminum.
HALO Wallbox™ is one of the smallest charging stations available and comes equipped with a fixed cable. This allows you to plug in your car easily without having to get a separate cable every single time.
Why Buy From Us?
- Fast and Free Shipping to anywhere in Australia * min order $99
- 3 Years Warranty
- Nationwide Installation Coverage
- 100% Australian Owned - Support Us to Support Other Locals
- 100% Positive Testimonials and Feedback
- Expert, relevant and local support
- Responsible Supplier (ERAC Registered)
- All products in stock ready for despatch
- All products RCM and NZ Worksafe compliant
Charge-Amps - HALO 11kw
Charging Current - 3 x 16A
Rated voltage - 100-240 V AC
Frequency - 50/60 Hz
Conditions - Inside and outside ≤ 95% RH
Method - Mounted on wall or pole with flat surface
Isolation - Class 1
Charging mode - Mode 3
Standards - IEC 61851-1:2017 | IEC 62196-2:2016
RCD tripping characteristics - DC-protection is integrated in the device. RDC type A must be installed and will together with the DC- protection have the same functionality as a RCD type B.
Overcurrent protection - Built-in overload protection. Short circuit protection type C16A must be installed.
Note - Protective earth (PE) shall be connected for proper functionality of the HALO.
Wifi signal - 10 m in front of HALO Wallbox, possibility to connect external antenna.
Metering - 3-phase voltage, current and power
Residual operating current AC - 30mA
Residual operating current DC - 6mA
Protection class - IP67
Weight - 4kg
Cable - 7.5m Diameter 12 ± 0.5mm
Power consumption - <5W (standby), <15W (laddar)
RCD self-test - AC + DC test before each charging session
Approximate dimensions without cable and cable bend protections.
HALO base: 262.4 x 230.3 x 159.4 mm EV connector: 88 x 125 x 82 mm